One of the problems experienced in every home is a leaking faucet. Although it’s very normal to happen in every home, you probably don’t know what causes a faucet to leak. Leaks come in differing sizes and forms, and leakages in the faucet is one of the most common types of them all.


Before trying to call a professional plumber, it is good to understand how and why faucet leaks and do some patch up until the professional arrives. This is for you to avoid wasting water and to prevent further problems that a leaking faucet could aggravate.

1. Parts That are Damaged

One of the most common reasons why a faucet leak is because of its old and faulty parts. If you continuously experience some drips in your faucet, the washer within your faucet may be damaged and needs to be replaced.

The case of a compression faucet is different though because there are times that the damaged seals are behind this leaking. This happens when the seal can no longer hold the water because it is already weak, provided the amount of time it fought back the water pressure as the faucet is used.

Read More


One of the best feeling a homeowner gets is when he or she remodels his or her house. Although the bathroom is one of the most important parts of every home, it receives the littlest of attention in terms of renovation. Thus, if you decided that your bathroom should be remodeled, then congratulations! You are actually doing a great job being a homeowner. RENOVATING BATHROOMS

However, remodeling isn’t that easy of a job. Aside from the fact that it is super hard to decide what design you are going to follow in your new bathroom, there are a lot of things you need to encounter before getting too excited with how the renovation will look like after the job.

So ladies and gentlemen, here are some of the nasty things that you should expect to see whenever you decide to renovate your bathroom. Prepare your buckets for these things could give much of an irk!

1. A Whole Pile of Mold

That’s right-you get to witness a whole pile of mold whenever you decide to renovate your bathroom. Molds are those yucky green substances that grow beneath the fixtures and walls in your bathroom. If you’ve decided to update your bathroom design, it is necessary for you to ask your plumbers to check whether there are molds that infest underneath the wall. This mold formation doesn’t only look dirty, but it could also posit some serious danger for you and your family’s health.

One amazing tip you could follow is to turn on your bathroom’s exhaust fan in order to promote good ventilation for the area.

2. Broken Pipes

One possible nightmare that you could experience in the duration of your bathroom’s renovation is breaking of pipes. This could necessarily cause so much trouble and so much cost especially when you get to realize it late. If you don’t attend to it as early as possible, it will not only cause further water leakage but it could also promote the continuous growth of molds beneath your wall. Thus, if you are planning to renovate your bathroom, you need to have a professional plumber come in handy to help you locate and avoid pipes. At the end of the day, it is better to be safe than to be suffering in the future.

3. Using VOC

VOCs or volatile organic compounds are these substances released as gasses by specific types of liquids or solids. What kind of VOCs can you use when renovating your bathroom? Paints, wood preservatives, aerosols and other substances necessary to build a structure are all VOCs, which should necessarily be avoided as much as possible. If you really need to paint walls, clean floors or clean the air, make sure to use those tools that are VOC-free. That is, these alternatives are often found in your local hardware.

In order to maintain safety in the duration of the remodeling works, the best thing to do is to hire competent and licensed plumbers aside from construction contractors. This will not only ensure that your plumbing system is safe even when the renovation starts, but it would also save you from further costs should there be any damages done in the remodeling process.

Read More


When you find a leaky and faulty pipe within your household, there is nothing you could do but to remain shocked and panic. Wrong! One of the most common problems experienced in every household is a leaking faucet or pipes. This is normal, since no single material in your house would remain strong forever. So, what do you do when there is a leaking in your faucet or pipe?


The best thing to do is to seek for professional help. That’s right, you have to call a plumber to fix things for you. However, when your house is slowly flooding because of the leak, what can you do to somehow stop the leaking while waiting for the plumber to arrive in the area?

Listed below are some of the tips on how to patch a leaky faucet or pipe.

1. Stop the Source of Water

The first thing you need to do before patching up these leaks is to actually stop the water from the source. If you are uncertain what valve to turn off, you could always have the choice to actually shut down the power of water from the source. Once you already did this, the next thing to do is to turn on the faucet nearest to the leak in order to drain off the excess water left in the pipe.

2. Clear the Area

After turning off the water supply and draining off the excess water, the next thing to do is to clean up the affected area. You could wipe off and even dry the affected pipe, as well as clean other parts that surround it such as the cabinets, the fixtures and the likes. Moreover, you should mop up the floor and get rid of any trace of water around the area. This is not only to avoid damaging these other things around the affected area, but it is also to prevent accidents caused by water build-up such as slippage and whatnot.

3. Prepare the Pipe

The next thing to do is to patch the leakage. Or not just yet. Before doing so, you have to prepare the affected area before remedying it with a patch. Smooth off the damaged area using a sandpaper. This is to ensure that there are no rust formations, limescale or some sharp and pointy edges. This will help the patch hold evenly and properly into covering the leak as soon as the professional help arrives.

4. Apply Epoxy

One of the best ways to patch up a leak is to actually cover it with a plumber’s epoxy. This could easily be purchased from your local hardware. Mix it properly until its ready to be used. Make sure that you shape the epoxy properly in order for it to patch up the leak properly. After applying it to the affected area, the next thing to do is to again smooth off the edges and leave it as is, based on the instructions written on the packaging. However, this could only a lot.

The best way to get rid of the negative effects of faucet leak is to ask for a professional plumber.




Read More